INCRA Table Saw Fence
The INCRA TS-LS offers the one thing that every table saw fence should have, but none of them do, namely, Automatic Positioning Control. All other table saws depend on a tape measure and your eyesight to position your work. That's why all table saw users are resigned to the fact that a good cut requires long set-up times and endless trial and error.
The INCRA TS-LS completely eliminates the need for these tedious processes by using INCRA'S patented lead screw technology to position your work instantly and automatically to within 0.002" (0.05 mm). Even better, if you want to repeat a cut, you can return to any former position in less than 5 seconds with ZERO repeatability error. This kind of accuracy and perfect repeatability are luxuries that woodworkers could only dream about before the INCRA TS-LS. And because of its structural design, centrally placed carriage, and optimized side mounted clamping system, the entire unit virtually welds itself together into one solid block of steel and aluminum when locked in place. The result is exceptional strength, rigidity and stability.
Will the INCRA TS-LS fit on my table saw?
The INCRA TS-LS will fit directly on just about any standard 10" (250 mm) table saw, typically without any drilling or tapping. There are only two things you need to check to make sure that it will fit your saw:
1. The length of miter gauge slot (front-to-back distance of table). If this measurement is 28-1/2” (724 mm) or less (standard for most 10" table saws), the standard INCRA TS-LS will will fit your saw. If this measurement is between 28-1/2” and 33” (724 mm - 838 mm), the TS-LS System can be ordered with a longer fence extrusion and base support panel for a nominal charge as a substitution for the standard-length components.
2. The front and rear surfaces of the saw. These surfaces must be flat and square to the top, with at least two holes in each surface. Hole locations and diameter are unimportant because INCRA's universal rail mounting brackets will work with any hole pattern and a wide variety of hole sizes.
We offer the TS-LS Systems in 810 mm and 1230 mm range models. Look at this report that shows how an Incra LSTS fence fits a budget table saw.
Notice: table saw not included!
This INCRA TS-LS Table Saw Fence System uses the 810 mm LS Positioner and a pair of 72 inch (183 cm) rails.
The standard Mount Unit (LS32-TS) handles saws measuring 28" (711 mm) or smaller front-to-rear (along the miter slot).
Incra number: M-LS32-TS
Order nr. 314715
Price ✱€ 499.00
INCRA METRIC TS-LS Table Saw Fence
with Upgrade for large Table
This INCRA TS-LS Table Saw Fence System uses the 810 mm LS Positioner and a pair of 72 inch (183 cm) rails.
The "XL" Mount Unit (LS32-TS-XL), which has a longer fence and base support panel than the fence above, handles saws measuring 28 inch (711 mm) to 33-1/2 inch (851 mm) deep (along the miter slot).
Incra number: M-LS32-TS-XL
Order nr. 314716
Price ✱€ 549.00
Table saw fences we ship only with UPS
Notice: table saw not included!
This INCRA TS-LS Table Saw Fence System uses the 1320 mm LS Positioner and a pair of 92 inch (234 cm) rails. Rail support legs in set included.
The standard Mount Unit (LS32-TS) handles saws measuring 28" (711 mm) or smaller front-to-rear (along the miter slot).
Incra number: M-LS52-TS
Order nr. 314721
Price ✱€ 595.00
Table saw fences we ship only with UPS
Notice: table saw and router table tops not included!
with Wonder Fence
This INCRA TS-LS Joinery System uses the 810 mm LS Positioner with Wonder Fence and a pair of 72 inch (183 cm) rails.
The standard Mount Unit (LS32-TS-WF) handles saws measuring 28" (711 mm) or smaller front-to-rear (along the miter slot).
Incra number: M-LS32-TS-WF
Order nr. 314717
Price ✱€ 689.00
INCRA METRIC TS-LS Table Saw Fence
with Wonder Fence
with Upgrade for large Table
This INCRA TS-LS Joinery System uses the 810 mm LS Positioner with Wonder Fence and a pair of 72 inch (183 cm) rails.
The "XL" Mount Unit (LS32-TS-WF-XL), which has a longer fence and base support panel than the fence above, handles saws measuring 28 inch (711 mm) to 33-1/2 inch (851 mm) deep (along the miter slot).
Incra number: M-LS32-TS-WF-XL
Order nr. 314718
Price ✱€ 735.00
Table saw fences we ship only with UPS
Notice: table saw and router table tops not included!
with Wonder Fence
This INCRA TS-LS Joinery System uses the 1320 mm LS Positioner with Wonder Fence and a pair of 92 inch (234 cm) rails. Rail support legs in set included.
The standard Mount Unit (LS32-TS-WF) handles saws measuring 28" (711 mm) or smaller front-to-rear (along the miter slot).
Incra number: M-LS52-TS-WF
Order nr. 314723
Price ✱€ 785.00
Notice: legs not shown on picture!
Table saw fences we ship only with UPS
For upgrade an existing INCRA Table Saw System without legs.
Order nr. 314729
Price ✱€ 59.95
As the largest fence positioner of the LS family, the LS32 was designed specifically for table saw use in conjunction with an INCRA TS Rail System.
(not for router tables)
Length 106 cm
Order nr. 314713
Price ✱€ 269.00
For upgrade an existing INCRA Standard LS Positioner or an INCRA Standard Table Saw System.
The Wonder Fence Upgrade is directly compatible with TS-LS fence systems.
Order nr. 314861
Price ✱€ 179.00
An INCRA TS System is intended to be a long-term investment, and owners generally transfer their INCRA systems to new saws as they upgrade their machinery. This is an upgrade kit that allows owners of TS-LS to install their fence systems on the newer cabinet saws that are more than 711 mm (28 inch) deep front-to-rear.
The conversion includes a 864 mm (34 inch) base support panel and a 1181 mm (46-1/2 inch) CNC machined fence section. That's 178 mm and 267 mm (7 inch and 10-1/2 inch) longer than the standard components, respectively, and they allow a TS-LS fence system to be transferred to saws up to 851 mm (33-1/2 inch) deep.
Order nr. 314730
Price ✱€ 89.50
Menu
